クイックルハンディ本体　伸び縮みタイプ

How to assemble and use
①

A Handle (assembled): 1
B Sheet: 1

②
Set the sheet on the head.
Put the hooks of the tool through the holes (notches) in the edges of the sheet and secure it.

③
When the tip of the sheet becomes soiled, you can reverse the tip and handle side and use the entire surface without waste.　

Precautions
● Do not use for other than the intended use.
● Wipe gently.
● Sheets cannot be washed.
● Do not use when the sheet has grains of sand or hard dirt attached. (This may damage LCD screens and furniture.)
● Sheets are not water-absorbent and should not be used on wet areas.
● Do not use on rough surfaces and on wood with rough surfaces. The fibers of the sheet may come off.
● Do not use on car bodies. The car surface may become damaged due to grains of sand and hard dirt on the surface.
● Turn off items that are hot, such as light bulbs, and clean after they have cooled. (It may melt when used on surfaces with high temperature.)
● Turn off the TV or other appliances before cleaning as static electricity can make it difficult to remove dust.
● Avoid direct sunlight and keep away from areas with high temperatures. It may become discolored or deformed.
● Do not leave the sheet on unfinished wood, vinyl floors and furniture for long periods of time. They may become discolored.
● When using, do not wipe, adjust lengths or swing with strong force. Applying too much force may cause the tool to break or the handle to come out.
● Do not force the tool into gaps where it cannot fit. The sheet may come off or the tool may break. If it is dislodged, secure it firmly with a rubber band.
● Do not lean the tool against a wall with the tip pointing downwards. The tool tip may deform.

Made in China