クイックルハンディ　本体

How to assemble
Insert the round hook up into the insertion part of the head.
* Cannot be disassembled after assembling.

How to set the sheet
① Wrap the sheet on the head.
② Put the hooks of the tool through the holes (notches) in the edges of the sheet and secure it.
★ When the tip of the sheet becomes soiled, you can reverse the tip and handle side and use the entire surface without waste.

Precautions
● Do not use for other than the intended use.
● Wipe gently.
● Sheets cannot be washed.
● Do not use when the sheet has grains of sand or hard dirt attached. (This may damage LCD screens and furniture.)
● Sheets are not water-absorbent and should not be used on wet areas.
● Do not use on rough surfaces and on wood with rough surfaces. The fibers of the sheet may come off.
● Do not use on car bodies. The car surface may become damaged due to grains of sand and hard dirt on the surface.
● Turn off items that are hot, such as light bulbs, and clean after they have cooled. (It may melt when used on surfaces with high temperature.)
● Turn off the TV or other appliances before cleaning as static electricity can make it difficult to remove dust.
● Avoid direct sunlight and keep away from areas with high temperatures. It may become discolored or deformed.
● Do not leave the sheet on unfinished wood, vinyl floors and furniture for long periods of time. They may become discolored.
● Do not apply excessive force when using. The tool may break.
● Do not force the tool into gaps where it cannot fit. The sheet may come off or the tool may break. If it is dislodged, secure it firmly with a rubber band.
● When the tool (handle) becomes soiled, wipe with water and dry in the shade. If the product becomes heavily soiled, wipe with a mild detergent solution and then wipe with water.

Made in China